ABB AC500 V3 Hardware Manual page 563

Fig. 83: Connection of analog output loads (voltage)
The following measuring ranges can be configured
on page 565 :
Voltage
For a description of the function of the LEDs, please refer to the Diagnosis and displays /
Displays chapter
Unused analog outputs can be left open-circuited.
Connection of analog output loads (Current)
The following figure shows the connection of output loads to the analog output AO0. Proceed
with the analog output AO1 in the same way.
2022/01/31
-10 V...+10 V
Ä Chapter 1.6.3.1.1.8 "State LEDs" on page 572.
3ADR010278, 3, en_US
I/O modules > Digital/Analog I/O modules
Ä Chapter 1.6.3.1.1.6 "Parameterization"
Load ±10 mA max.
Device specifications
1 channel used
563