ABB AC500 V3 Hardware Manual page 621

The inputs/outputs are galvanically isolated from the CANopen network. There is no potential
separation between the channels. The configuration of the analog inputs/outputs is performed
by software.
For use in extreme ambient conditions (e.g. wider temperature and humidity range), a special
XC version of the device is available.
1.7.2.2.2 Functionality
Parameter
Interface
Protocol
Power supply
Supply of the electronic circuitry of the I/O
modules attached
Rotary switches
LED displays
External supply voltage
Transmission rates
Bus connection
Processor
Expandability
State display
Adjusting elements
Ambient temperature
Current consumption
Weight (without terminal unit)
Process supply voltages UP/UP3
2022/01/31
Rated value
Max. load for the terminals
Protection against reversed voltage
Rated protection fuse on UP/UP3
Galvanic isolation
Inrush current from UP (at power up)
3ADR010278, 3, en_US
Communication interface modules (S500) > CANopen
Value
CAN
CANopen
From the process supply voltage UP
Through the I/O bus interface (I/O bus)
For setting the CANopen Node ID for configura-
tion purposes (00h to FFh)
For system displays, signal states, errors and
power supply
Via terminals ZP, UP and UP3 (process supply
voltage 24 V DC)
10 / 20 / 50 / 125 / 250 / 500 / 800 kbit/s 1
Mbit/s Auto transmission rate detection is sup-
ported
Depending on used terminal unit TU510: 9-pin
D-sub connector TU518: 10-pin terminal block
Hilscher NETX 100
CI58x can only be used on onboard CAN inter-
face and without any I/O expansion module
Ä Table 132 "CANopen" on page 617.
Module state: PWR/RUN, CN-RUN, CN-ERR,
E-ERR, I/O bus
2 rotary switches for generation of the node
address
System data AC500 Ä Chapter 2.6.1 "System
data AC500" on page 971
System data AC500 XC
"System data AC500-XC" on page 1023
UP: 0.2 A UP3: 0.06 A + 0.5 A max. per output
Ca. 125 g
24 V DC (for inputs and outputs)
10 A
Yes
10 A fast
CANopen interface against the rest of the
module
On request
Device specifications
Ä Chapter 2.7.1
621