ABB AC500 V3 Hardware Manual page 854

Device specifications
Communication interface modules (S500) > PROFINET
LED
STA2 ETH
(System LED
"SF")
S-ERR
I/O-Bus
ETH1
ETH2
Table 176: States of the 29 process LEDs
LED
DC0 to DC7
DI8 to DI15
DO8 to DO15
UP
UP3
CH-ERR1 to CH-
ERR3
1.7.5.3.9 Technical data
The system data of AC500 and S500
applicable to the standard version.
The system data of AC500-XC
applicable to the XC version.
854
Color OFF
Red ---
Green ---
Red No system error
Red No error
Green No expansion
modules con-
nected or com-
munication error
Green No connection at
Ethernet inter-
face
Yellow ---
Green No connection at
Ethernet inter-
face
Yellow ---
Color OFF
Yellow Input/Output is
OFF
Yellow Input is OFF
Yellow Output is OFF
Green Process supply
voltage missing
Green Process supply
voltage missing
Red No error or
process supply
voltage missing
Ä Chapter 2.6.1 "System data AC500" on page 971 are
Ä Chapter 2.7.1 "System data AC500-XC" on page 1023 are
3ADR010278, 3, en_US
ON Flashing
--- Device is not
configured
--- Got identification
request from I/O
controller
System error ---
(collective error)
Internal error --
Expansion ---
modules con-
nected and
operational
Connected to ---
Ethernet inter-
face
Device is trans- Device is trans-
mitting telegrams mitting telegrams
Connected to ---
Ethernet inter-
face
Device is trans- Device is trans-
mitting telegrams mitting telegrams
ON Flashing
Input/Output is --
ON
Input is ON (the --
input voltage is
even displayed if
the supply
voltage is OFF)
Output is ON --
Process supply --
voltage OK and
initialization fin-
ished
Process supply --
voltage OK
Internal error Error on one
channel of the
corresponding
group
2022/01/31