ABB AC500 V3 Hardware Manual page 969

Table 194: Technical data of the module
Parameter
Process supply voltage
Galvanic isolation
Isolated Groups
Weight
Mounting position
Table 195: Technical data of the inputs
Parameter
Number of channels per module
Distribution of the channels into groups
Connections of channels I0 to I5
Reference potential for the channels I0 to I5
Input current per active channel (at input
voltage +24 V DC)
The current is given through the used pro-
cessor module.
Inrush current per active channel
The current is given through the used pro-
cessor module.
Ordering data
Part no.
1SAP 187 600 R0001
2.5.5.5 TA543 - Screw mounting accessory
Intended pur- The TA543 screw mounting accessory is used for mounting the processor module PM50xx
pose without DIN rail.
2022/01/31
Connections
Rated value
Max. ripple
Protection against reversed voltage
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
Value
Terminal (L+) for +24 V DC and terminal (M) for
0 V DC
24 V DC
5 %
Yes
Yes (on processor module PM50xx)
1 (6 channels per group)
18 g
Horizontal or vertical
Value
6 digital input channels (+24 V DC)
1 (6 channels per group)
Terminals 2...7
Terminal 1 (negative pole of the process supply
voltage, signal name C0...5)
Typ. 5 mA
Typ. 5 mA
Description
TA5400-SIM, input simulator
for PM50x2
3ADR010278, 3, en_US
System assembly, construction and connection
AC500-eCo > Handling of accessories
Product life cycle phase *)
Active
969