ABB AC500 V3 Hardware Manual page 308

Device specifications
I/O modules > Digital I/O modules
LED
Technical data
The system data of AC500 and S500
applicable to the standard version.
The system data of AC500-XC
applicable to the XC version.
Only additional details are therefore documented below.
The technical data are also applicable to the XC version.
Parameter
Process supply voltage UP
Current consumption
Weight (without terminal unit)
Mounting position
Cooling
308
State
CH-ERR1 Channel
error, error
CH-ERR2
messages in
groups (dig-
CH-ERR3
ital inputs
CH-ERR4
combined
into the
groups 1, 2,
3, 4)
) Module error Red
CH-ERR 2
1
) Indication LED is ON even if an input signal is applied to the channel and
the supply voltage is off. In this case the module is not operating and does not
generate an input signal.
2 ) All of the LEDs CH-ERR1 to CH-ERR4 light up together
Connections
Rated value
Max. ripple
Protection against reversed voltage
Rated protection fuse for UP
Galvanic isolation
From 24 V DC power supply at the
terminals UP/L+ and ZP/M of the CPU/
communication interface module
From UP at normal operation
Inrush current from UP (at power up)
3ADR010278, 3, en_US
Color LED = OFF
Red No error or
process
Red
supply
voltage is
Red
missing
Red
--
Ä Chapter 2.6.1 "System data AC500" on page 971 are
Ä Chapter 2.7.1 "System data AC500-XC" on page 1023 are
Value
Terminals 1.8, 2.8, 3.8 and 4.8 for +24 V (UP)
as well as 1.9, 2.9, 3.9 and 4.9 for 0 V (ZP)
24 V DC
5 %
Yes
10 A fast
Yes, per module
ca. 2 mA
0.15 A
0.008 A²s
ca. 105 g
Horizontal or vertical with derating (output
load reduced to 50 % at 40 °C per group)
The natural convection cooling must not be
hindered by cable ducts or other parts in the
switchgear cabinet.
LED = ON LED flashes
Severe error Error on one
within the cor- channel of the
responding corresponding
group group
Internal error --
2022/01/31