ABB AC500 V3 Hardware Manual page 209

Technical data
The System Data of AC500-eCo apply
on page 925
Only additional details are therefore documented below.
Parameter
Process supply voltage UP
Current consumption from 24 V DC power
supply at the L+/UP and M/ZP terminals of
the CPU/communication interface module
Galvanic isolation
Isolated groups
Surge-voltage (max.)
Max. power dissipation within the module
Weight
Mounting position
Cooling
No effects of No effects of multiple overloads on isolated multi-channel modules occur, as every channel is
multiple over- protected individually by an external fuse.
loads
Technical data of the digital outputs
Parameter
Number of channels per module
Distribution of the channels into groups
Connection of the channels O0 to O7
Connection of the channels O8 to O15
Common power supply voltage
Reference potential for the channels O0 to
O15
2022/01/31
Connections
Rated value
Current consumption via UP terminal
Max. ripple
Inrush current
Protection against reversed voltage
Rated protection fuse for UP
3ADR010278, 3, en_US
Ä Chapter 2.5.1 "System data AC500-eCo V3"
Value
Terminal 19 for UP (+24 V DC) and terminal 20
for ZP (0 V DC)
24 V DC
20 mA + max. 0.5 A per output
5 %
0.000002 A 2 s
Yes
Recommended; the outputs must be protected
by an 3 A fast-acting fuse
Ca. 10 mA
Yes, between the output group and the rest of
the module
1 (16 channels per group)
35 V DC for 0.5 s
1.4 W
Ca. 125 g
Horizontal or vertical
The natural convection cooling must not be
hindered by cable ducts or other parts in the
switchgear cabinet.
Value
16 transistor outputs (24 V DC, 0.5 A max.)
1 (16 channels per group)
Terminals 1 to 9
Terminals 11 to 18
Terminal 19 (positive pole of the process voltage,
signal name UP)
Terminal 20 (negative pole of the process
voltage, signal name ZP)
Device specifications
I/O modules > Digital I/O modules
209