ABB AC500 V3 Hardware Manual page 891

AC500-eCo V3
1 Micro memory card slot cover
2 Micro memory card
3 Micro memory card slot
1.
2.
3.
Remove the
micro memory
card
2022/01/31
Open the micro memory card slot cover by turning it upwards.
Carefully insert the micro memory card into the micro memory card slot as far as it will go.
Observe orientation of card.
Close the micro memory card slot cover by turning it downwards.
NOTICE!
Removal of the micro memory card
Do not remove the micro memory card when it is working!
AC500 V3: Remove the micro memory card with micro memory card adapter
only when no black square ( ) is shown next to MC in the display.
AC500-eCo V3: Remove the micro memory card only when the MC LED is not
blinking.
Otherwise the micro memory card and/or files on it might get corrupted and/or
normal PLC operation might be disturbed.
3ADR010278, 3, en_US
Device specifications
Accessories > AC500 (standard)
891