ABB AC500 V3 Hardware Manual page 789

1.7.4.2.9 Technical data
The system data of AC500 and S500
applicable to the standard version.
The system data of AC500-XC
applicable to the XC version.
Only additional details are therefore documented below.
The technical data are also applicable to the XC version.
Technical data of the module
Parameter
Process supply voltages UP/UP3
Rated value
Max. load for the terminals
Protection against reversed voltage
Rated protection fuse on UP/UP3
Galvanic isolation
Inrush current from UP (at power up)
Current consumption via UP (normal
operation)
Current consumption via UP3
Connections
Max. power dissipation within the module
Number of digital inputs
Number of digital outputs
Number of configurable digital inputs/outputs
Reference potential for all digital inputs and
outputs
Ethernet
Setting of the I/O device identifier
Diagnosis
Operation and error displays
Weight (without terminal unit)
Mounting position
Extended ambient temperature (XC version)
Cooling
2022/01/31
Ä Chapter 2.6.1 "System data AC500" on page 971 are
Ä Chapter 2.7.1 "System data AC500-XC" on page 1023 are
Value
24 V DC (for inputs and outputs)
10 A
Yes
10 A fast
Ethernet interface against the rest of the
module
On request
0.15 A
0.06 A + 0.5 A max. per output
Terminals 1.8 and 2.8 for +24 V (UP)
Terminal 3.8 for +24 V (UP3)
Terminals 1.9, 2.9 and 3.9 for 0 V (ZP)
6 W
8
8
8
Negative pole of the supply voltage, signal
name ZP
10/100 base-TX, internal switch, 2 x RJ45
socket
With 2 rotary switches at the front side of the
module
See Diagnosis and Displays
1.7.4.2.8 "Diagnosis" on page 782
34 LEDs (totally)
Ca. 125 g
Horizontal or vertical with derating (output load
reduced to 50 % at 40°C per group)
> 60 °C on request
The natural convection cooling must not be
hindered by cable ducts or other parts in the
switchgear cabinet.
3ADR010278, 3, en_US
Communication interface modules (S500) > Modbus
Ä Chapter
Device specifications
789