ABB AC500 V3 Hardware Manual page 125

1.5.1.1 Technical data
The system data of AC500 and S500
applicable to the standard version.
The system data of AC500-XC
applicable to the XC version.
Only additional details are therefore documented below.
The technical data are also applicable to the XC version.
Parameter
Number of I/O channels per module
Distribution of the channels into groups
Network interface connector
Rated voltage
Max. permitted total current
Ethernet
Grounding
Screw terminals
Spring-type terminals
Weight
Mounting position
2022/01/31
Terminal units (AC500 standard) > TU507-ETH and TU508-ETH for Ethernet communication interface modules
NOTICE!
Risk of corrosion!
Unused connectors and slots may corrode if XC devices are used in salt-mist
environments.
Protect unused connectors and slots with TA535 protective caps for XC
Ä Chapter 1.8.3.4 "TA535 - Protective caps for XC devices"
devices.
on page 906
Ä Chapter 2.7.1 "System data AC500-XC" on page 1023 are
3ADR010278, 3, en_US
Ä Chapter 2.6.1 "System data AC500" on page 971 are
Value
Max. 24 (depending on the inserted communi-
cation interface module)
3 groups of max. 8 channels each (1.0...1.7,
2.0...2.7, 3.0...3.7), the allocation of the chan-
nels is given by the inserted Ethernet bus
module
2 RJ45, 8-pole
24 V DC
10 A via the supply terminals (UP, UP3 and
ZP)
10/100 base-TX or 100 base-TX (depending
on CI5xx module plugged in), 2 RJ45 socket
Direct connection to the grounded DIN rail or
via the screws with wall mounting
Front terminal, conductor connection vertically
with respect to the printed circuit board
Front terminal, conductor connection vertically
with respect to the printed circuit board
200 g
Horizontal or vertical
Device specifications
125