ABB AC500 V3 Hardware Manual page 952

System assembly, construction and connection
AC500-eCo > Handling of accessories
2.5.5.2 TA52xx(-x) - Terminal block sets
Intended pur- Removable terminal blocks are used for power supply and for I/O connectors on AC500-eCo V3
pose processor modules PM50x2.
For option boards there are different removable terminal blocks in spring version.
For the AC500-eCo V3 Basic CPUs a 3-pin terminal block for power supply and a 13-pin
terminal block for I/O connectors are used.
For the AC500-eCo V3 Standard CPUs and Pro CPUs a 3-pin terminal block for power supply,
a 13-pin terminal block and a 12-pin terminal block for I/O connectors are used.
For all CPUs there is a screw and a spring variant available.
Basic CPU
Spring type
TA5211-TSPF-B
952
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
Screw type
TA5211-TSCL-B
3ADR010278, 3, en_US
Standard and Pro CPUs
Spring type
TA5212-TSPF
Screw type
TA5212-TSCL
2022/01/31