ABB AC500 V3 Hardware Manual page 42

Device specifications
Processor modules > AC500-eCo
Parameter
Output current
Rated current per channel (max.)
Rated current per group (max.)
Rated current (all channels together, max.)
Demagnetization when inductive loads are
switched off
Spark suppression with inductive AC loads
Switching frequencies
With resistive loads
With inductive loads
With lamp loads
Short-circuit-proof / Overload-proof
Rated protection fuse (for each channel)
Overload message
Output current limitation
Resistance to feedback against 24 V DC
Connection of 2 outputs in parallel
Lifetime of relay contacts (cycles)
Max. cable length *)
Shielded
Unshielded
*) For fast inputs and fast outputs including PTO and PWM, a shielded cable must be used and
the max. cable length is 50 m.
Technical data of the limit switch outputs
Parameter
Limit switch
42
PM5012-T-ETH PM5012-R-ETH PM5032-T-ETH
Useable outputs 4
Fast output DO0 ... DO3
max. 5 kHz
Fast output, -
max. 100 kHz
3ADR010278, 3, en_US
Value
2.0 A (24 V DC resistance and general use,
100 V AC...240 V AC, resistance, general
use and pilot duty)
6 A
12 A
External demagnetization measures must be
implemented when switching inductive loads.
Must be performed externally according to
driven load specification
Max. 1 Hz
On request
On request
No, should be provided by an external fuse
or circuit breaker
On request
No
No
No
Not possible
100,000 at rated load
On request
On request
PM5052-T-ETH
PM5072-
T-2ETH
- 8
- DO0 ... DO3
- DO4 ... DO7
PM5032-R-
ETH
PM5052-R-
ETH
2
-
DC12 ... DC13
2022/01/31