ABB AC500 V3 Hardware Manual page 675

LED
S-ERR
I/O bus
States of the 29
LED
process LEDs
DC0 to DC7
DI8 to DI15
DO8 to DO15 Yellow
UP
UP3
CH-ERR1 to
CH-ERR3
1.7.2.3.10 Technical data
The system data of AC500 and S500
applicable to the standard version.
The system data of AC500-XC
applicable to the XC version.
Only additional details are therefore documented below.
The technical data are also applicable to the XC version.
Technical data of the digital inputs
Parameter
Number of channels per module
Distribution of the channels into groups
Terminals of the channels DI0 to DI7
Reference potential for all inputs
2022/01/31
Color
Red
Green
Color OFF
Yellow Input/output is OFF Input/output is ON
Yellow Input is OFF
Output is OFF
Green Process supply
voltage missing
Green Process supply
voltage missing
Red No error or process
supply voltage
missing
Ä Chapter 2.7.1 "System data AC500-XC" on page 1023 are
Multiple overloads
No effects of multiple overloads on isolated multi-channel modules occur, as
every channel is protected individually by an internal smart high-side switch.
3ADR010278, 3, en_US
Communication interface modules (S500) > CANopen
OFF ON
No error Internal error
No decentralized Decentralized I/O
I/O modules con- modules con-
nected or com- nected and
munication error operational
ON
Input is ON (the input
voltage is even dis-
played if the supply
voltage is OFF)
Output is ON
Process supply
voltage OK and initi-
alization finished
Process supply
voltage OK
Internal error
Ä Chapter 2.6.1 "System data AC500" on page 971 are
Value
8
1 group of 8 channels
Terminals 3.0 to 3.7
Terminals 2.9 ... 4.9 (negative pole of the
supply voltage, signal name ZP)
Device specifications
Flashing
--
---
Flashing
--
--
--
--
--
Error on one channel
of the corresponding
group
675