ABB AC500 V3 Hardware Manual page 306

Device specifications
I/O modules > Digital I/O modules
Counter input data (words)
Counter output data (words)
I/O configuration
The module itself does not store configuration data. It receives its parameterization data from
the master device of the I/O bus (CPU or communication interface module) during power-up of
the system.
Hence, replacing I/O modules is possible without any re-parameterization via software.
Parameterization
Firmware version
Firmware version > V2.0.0
The parameter data directly influences the functionality of modules.
For non-standard applications, it is necessary to adapt the parameters to your system configura-
tion.
Module: Module slot address: Y = 1...10
No.
1
2
3
4
306
Without the fast counter
0
0
If the external power supply voltage via UP/ZP terminals fails, the I/O module
loses its configuration data. The whole station has to be switched off and on
again to re-configure the module.
Name Value Internal
value
Module Internal 1000
ID
1
)
Ignore No 0
module
Yes 1
2
)
Param- Internal 3-CPU
eter
2-FBP
length
Check Off 0
supply
On 1
3ADR010278, 3, en_US
With the fast counter (only
with AC500)
4
8
Configuration
The arrangement of the parameter data is per-
formed by Control Builder Plus/ Automation
Builder software.
Internal Default Min.
value,
type
Word 1000 0
0x03E8
Byte No
0x00
Byte 3 0
2
Byte On 0
0x01
Max. EDS
Slot/
Index
65535 0x0Y01
Not for
FBP
255 0x0Y02
1 0x0Y03
2022/01/31