Changing Oil, Axis-4 And Axis-5 Gear Unit - ABB IRB 390 Product Manual

4.4.3 Changing oil, axis-4 and axis-5 gear unit

Location of the oil plugs
The oil plugs in axis-4 and axis-5 gear units are located as shown in the figure.
xx1900000312
A
B
C
Required tools and equipment
Equipment
Oil collecting vessel
Oil dispenser
Standard toolkit
Product manual - IRB 390
3HAC066566-001 Revision: B
Oil plug axis 4
Ventilation plug
Oil plug axis 5
Article number
-
-
-
© Copyright 2020 - 2021 ABB. All rights reserved.
4.4.3 Changing oil, axis-4 and axis-5 gear unit
Note
The capacity of the vessel must
be sufficient to take the complete
amount of oil.
One example of oil dispenser can
be found in section
ation in gearboxes on page
Content is defined in section
Standard toolkit on page
Continues on next page
4 Maintenance
Type of lubric-
94.
336.
101