ABB IRB 390 Product Manual page 113

3
4
Product manual - IRB 390
3HAC066566-001 Revision: B
Action
Fasten the battery cover and sealing, with lubric-
ated screws and washers.
Note
Do not overtighten to avoid damaging the sealing.
DANGER
Make sure all safety requirements are met when
performing the first test run.
© Copyright 2020 - 2021 ABB. All rights reserved.
4 Maintenance
4.4.5 Changing the SMB battery
Continued
Note
Tightening torque: 4 Nm
Hexagon flange bolt: 3HAC060233-
006 (M6x16 stainless steel/A4-80)
Washer: 3HAC058626-003 (M6 hy-
gienic. If the rubber is damaged,
replace the washer with new for
hygienic purpose.)
Anti-seize paste: 3HAC070875-002
(Molykote P1900)
xx1900000407
113