ABB IRB 390 Product Manual page 336

9 Reference information
9.5 Standard toolkit
9.5 Standard toolkit
General
All service (repairs, maintenance, and installation) procedures contains lists of
tools required to perform the specified activity.
All special tools required are listed directly in the procedures while all the tools
that are considered standard are gathered in the standard toolkit and defined in
the following table.
This way, the tools required are the sum of the standard toolkit and any tools listed
in the instruction.
Contents, standard toolkit
Qty
1
1
1
1
1
1
1
1
1
1
1
1
336
Tool
Torque wrench 32 mm 45 Nm
Torque wrench, 4-190 Nm
Interchangeable head torque wrench
Open-end wrench 47 mm
Torx bit, size T30
Ratchet head for torque wrench 1/2
Hex socket wrench insert, size 10 mm
Hex socket wrench insert, size 13 mm
Hexagon bit socket head cap, size 6 mm
Screw M8 x minimum 25 mm
Magnetic retrieval tool
Striker
© Copyright 2020 - 2021 ABB. All rights reserved.
Rem.
To be used on upper arm
covers.
To be used as an anvil
during fitting of universal
joint to axis-4 and axis-5
motor shaft.
To be used to press out
the cassette sealing holder
from the upper arm.
Useful for retrieving
dropped screws or wash-
ers during spare part re-
placements inside the
base.
Used for knocking out the
cassette sealing.
Product manual - IRB 390
3HAC066566-001 Revision: B