Gateway (Field Bus) Units - ABB IRB 6400R Product On-Line Manual

Installation and Commissioning

3.17 Gateway (Field bus) units

3.17.1 RIO (Remote Input Output), remote I/O for Allen-Bradley PLC DSQC 350
The RIO-unit can be programmed for 32, 64, 96 or 128 digital inputs and outputs.
The RIO-unit should be connected to an Allen-Bradley PLC using a screened, two con-
ductor cable.
Technical data
See Product Specification IRB 6400, chapter 3.10 and Allen-Bradley RIO specifica-
tion.
Further information
For setup parameters, see User's Guide, section System Parameters, Topic: Controller.
Circuit diagram, see chapter 11.
Customer terminals: X8 and X9
Signal name
LINE1 (blue)
LINE2 (clear)
shield
cabinet ground
X5
Device net input
and ID connector
Not to be used
Device Net connector X5, see section 3.16.3 on page 62
Figure 52 RIO-unit
Product Manual IRB 6400R
X8
Pin
Remote
1
I/O in
2
3
4
X5
X3
DSQC 350
Connecting Signals
X9
Signal name Pin
blue 1
clear 2
shield 3
cabinet ground 4
X9
X8
ABB Flexible Automation
Remote
I/O out
RIO out
RIO in
83