General; Introduction; Applicable Safety Standards - ABB IRB 6400R Product On-Line Manual

Safety

1 General

This information on safety covers functions that have to do with the operation of the
industrial robot.
The information does not cover how to design, install and operate a complete system,
nor does it cover all peripheral equipment, which can influence the safety of the total
system.
To protect personnel, the complete system has to be designed and installed in accord-
ance with the safety requirements set forth in the standards and regulations of the coun-
try where the robot is installed.
The users of ABB industrial robots are responsible for ensuring that the applicable
safety laws and regulations in the country concerned are observed and that the safety
devices necessary to protect people working with the robot system have been designed
and installed correctly.
People who work with robots must be familiar with the operation and handling of the
industrial robot, described in applicable documents, e.g. Users's Guide and Product
Manual.
The diskettes which contain the robot's control programs must not be changed in
any way because this could lead to the deactivation of safety functions, such as
reduced speed.

1.1 Introduction

Apart from the built-in safety functions, the robot is also supplied with an interface for
the connection of external safety devices.
Via this interface, an external safety function can interact with other machines and
peripheral equipment. This means that control signals can act on safety signals
received from the peripheral equipment as well as from the robot.
In the Product Manual/Installation, instructions are provided for connecting safety
devices between the robot and the peripheral equipment.

2 Applicable Safety Standards

The robot is designed in accordance with the requirements of ISO10218, Jan. 1992,
Industrial Robot Safety. The robot also fulfils the ANSI/RIA 15.06-1992 stipulations.
Product Manual
Safety
3