Maintenance And Troubleshooting - ABB IRB 6400R Product On-Line Manual

Description
A special input can be set to order the robot to go to a service position. After service,
the robot is ordered to return to the programmed path and continue program execution.
You can also create special routines that will be automatically executed when the power
is switched on, at program start and on other occasions. This allows you to customise
each installation and to make sure that the robot is started up in a controlled way.
The robot is equipped with absolute measurement, making it possible to operate the
robot directly when the power is switched on. For your convenience, the robot saves
the used path, program data and configuration parameters so that the program can be
easily restarted from where you left off. Digital outputs are also set automatically to the
value prior to the power failure.

2.7 Maintenance and Troubleshooting

The robot requires only a minimum of maintenance during operation. It has been
designed to make it as easy to service as possible:
- The controller is enclosed, which means that the electronic circuitry is protected
when operating in a normal workshop environment.
- Maintenance-free AC motors are used.
- Liquid grease or oil is used for the gear boxes.
- The cabling is routed for longevity, and in the unlikely event of a failure, its
modular design makes it easy to change.
- It has a program memory "battery low" alarm.
The robot has several functions to provide efficient diagnostics and error reports:
- It performs a self-test when power on is set.
- Errors are indicated by a message displayed in plain language.
The message includes the reason for the fault and suggests recovery action.
- A board error is indicated by a LED on the faulty unit.
12
Select program to run:
Front A Front B Front C
Figure 7 The operator dialogs can be easily customised.
Product Specification IRB 6400R M99/BaseWare OS 3.2
Other SERVICE