Related Topics - Agilent Technologies 8960 Series Reference Manual

Preset Descriptions
Table 5. Full Preset Behavior
Function
Trigger Arm
Measurement Parameters
Maskable Message Display
State
Maskable Message Display
State
Status Preset
The STATUS:PRESET command sets the status system as defined in "SCPI 1995 Volume 2: Command
Reference" section 20.7. All of the enable registers are set to 0, all PTR registers are set to 1, and all NTR
registers are set to 0.
Example
OUTPUT 714;"STATUS:PRESET" !Presets the STATus subsystem.

Related Topics

"SYSTem:PRESet"
154
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_gen_inst_states.fm
Full Preset Result
Single (remote operation full
preset, *RST command)
all set to defaults
On (manual operation full
preset)
Off (remote operation full
preset)