Agilent Technologies 8960 Series Reference Manual page 567

Rear Panel Connectors
EXT INTERFACE CONTROL
Not functional for this release.
EXT SIG GEN/FRAME SYNCH
Not functional for this release.
FM MOD IN
This BNC connector allows you to use an external signal to frequency modulate the test set's RF generator. It
has a fixed sensitivity of 20 KHz/volt, and a frequency range of 100Hz to 20 KHz.
GPIB
This GPIB connector allows test set control with compatible devices.
LAN PORT
This RJ-45 connector provides connection for downloading firmware upgrades, or new test applications into
the test set. No other types of communication are possible with the LAN port.
PRINTER
Not functional for this release.
SERIAL 1
Not functional for this release.
SERIAL 2
Not functional for this release.
SERIAL 3
Not functional for this release.
TEST SET SYNCH IN
Not functional for this release.
TEST SET SYNCH OUT
Not functional for this release.
TIMEBASE ADJUST
This is the timebase adjust cover. Removing this screw allows access for timebase adjustment.
567
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_gen_rearpanel_con.fm