Agilent Technologies 8960 Series Reference Manual page 405

SETup:AFANalyzer:EXPandor[:SRLevel]
Function Sets/queries the expandor's reference level and automatically sets the expandor's state to ON.
Setting Range: 10 mV to 10 V
Resolution: 1 mV
Query Range: 10 mV to 10 V
*RST setting 1 V
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"SETUP:AFANALYZER:EXPANDOR:SRLEVEL 5V"
!Sets expandor state to on and level to 5 V.
SETup:AFANalyzer:EXPandor:RLEVel
Function Sets/queries the expandor's reference level to be used when the expandor's state is set to ON.
Setting Range: 10 mV to 10 V
Resolution: 1 mV
Query Range: 10 mV to 10 V
*RST setting 1 V
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"SETUP:AFANALYZER:EXPANDOR:RLEVEL 5V" !Sets expandor reference level to 5 V.
SETup:AFANalyzer:EXPandor:STATe
Function Sets/queries whether the expandor is enabled.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST setting 0 (off)
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"SETUP:AFANALYZER:EXPANDOR:STATE ON"
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_setup_afan.fm
SETup:AFANalyzer
405