Agilent Technologies 8960 Series Reference Manual page 559

Hide thumbs Also See for 8960 Series:

Table of Contents

W-CDMA Measurements

Measuring Waveform Quality

1. Configure the mobile station to generate a 12.2 kbps or 64 kbps reference measurement channel (RMC).

2. Press the

Measurement selection

3. Select the Waveform Quality measurement.

4. Press the WWQ Setup (

5. Set the measurement parameters as needed for your measurement situation.

Typical waveform quality results are shown above.

S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_man_measurements.fm