Introduction; Related Documentation; Follow The Startup Sequence - Agilent Technologies Acqiris U10 Series Manual

Introduction

The scope of this Startup Guide is to detail the processes of receiving and installing the Acqiris U10xx Series
Products and installing the required software. The Agilent MD1 High-Speed Digitizer Software is fully backward
compatible with existing software applications based on Acqiris software previously delivered with the U10xxA
series of digitizers.
If you have any questions after reviewing this information, please contact your local Agilent representative or
contact us through our website at

Related Documentation

This Startup Guide and the documentation listed below are on the CD and
at www.agilent.com/find/embedded . Select Technical Support >
Manuals.
Digitizer User Guide and Help system for the Soft Front Panel
l
Help systems for the Agilent device drivers (IVI-C and IVI-COM, and
l
LabVIEW G)
Product specifications (Data Sheet)
l

Follow the Startup Sequence

This Start-Up Guide is intended to lead the user through the four steps of product installation as summarized in the
diagram below. An optional fifth step shows how to perform a operational verification of the .
Closely follow the startup process flow in this document. Deviating from the sequence can
cause unpredictable system behavior, damage your system, and may cause personal injury.
Agilent Acqiris U10xx Series Products Startup Guide
www.agilent.com/find/assist
Step 1: Unpack and Inspect
Step 2: Verify Shipment
Step 3: Install Drivers and Software
Step 4: Install Modules
7