Agilent Technologies 8960 Series Reference Manual page 424

SETup:WCPower
SETup:WCPower:TIMeout[:STIMe]
Function The setting form of this command performs two functions: (1) sets the channel power
measurement's timeout (see
measurement's timeout STATe to 1 (on).
The query form returns the channel power measurement's timeout value.
Setting Range: 0.1 to 999.9 seconds
Resolution: 0.1 second
Query Range: 0.1 to 999.9
*RST Setting 10 seconds, on
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"SETUP:WCPOWER:TIMEOUT:STIME 5 S"
!Sets timeout state to ON and sets the timeout time to 5 seconds.
SETup:WCPower:TIMeout:STATe
Function Sets/queries the channel power measurement's timeout (see
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"SETUP:WCPOWER:TIMEOUT:STATE ON"
SETup:WCPower:TIMeout:TIME
Function Sets/queries the channel power measurement's timeout (see
be used when the timeout state is set to ON.
Setting Range: 0.1 to 999.9 seconds
Resolution: 0.1 second
Query Range: 0.1 to 999.9
*RST Setting 10 seconds
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"SETUP:WCPOWER:TIMEOUT:TIME 5 S"
424
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_setup_wcpower.fm
"Measurement Timeouts" ) value, and (2) sets the channel power
"Measurement Timeouts"
"Measurement Timeouts"
) state.
) setting to