Agilent Technologies 8960 Series Reference Manual page 299

CALL:STATus:CELL:SYSTem[:TYPE]?
Function Queries the current system type that the test set is currently emulating.
When the test set is in active cell operating mode (see
system type is selected by the
not available in the initial W-CDMA test application release.)
When the test set is in any test mode operating mode (see
operating mode, this command will return the corresponding system type.
Query Range: FDD|CW
*RST Setting FDD
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"CALL:STATUS:CELL:SYSTEM:TYPE?"
CALL:STATus:CPIChannel[:LEVel]?
Function Queries the current common pilot channel's power.
Query Range: -20.00 to 0 dB, 9.91 E+37
Resolution: 0.01 dB
*RST Setting -4.8 dB
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"CALL:STATUS:CPICHANNEL:LEVEL?"
CALL:STATus:CPIChannel:STATe?
Function Queries the current state of the common pilot channel.
Query Range: 1|0
*RST Setting 1 (on)
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"CALL:STATUS:CPICHANNEL:STATE?"
"CALL[:CELL]:OPERating"
"CALL[:CELL]:SYSTem"
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_call_status.fm
command. (Active cell operating mode is
"CALL[:CELL]:OPERating"
CALL:STATus
) the current
) or CW
299