Agilent Technologies 8960 Series Reference Manual page 411

SETup:WACLeakage:COUNt:STATe
Function Sets/queries the adjacent channel leakage multi-measurement state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 0 (off)
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"SETUP:WACLEAKAGE:COUNT:STATE ON" !Turns on adjacent channel leakage
multi-measurements.
SETup:WACLeakage:LOWer[1]:STATe
Function Sets/queries the 1st lower adjacent channel's state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 1 (on)
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"SETUP:WACLEAKAGE:LOW1:STATE 0
SETup:WACLeakage:LOWer2:STATe
Function Sets/queries the 2nd lower adjacent channel's state.
Setting Range: 1|ON|0|OFF
Query Range: 1|0
*RST Setting 1 (on)
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"SETUP:WACLEAKAGE:LOW2:STATE 0
" !Turns off the lower 1st adjacent channel.
" !Turns off the lower 2nd adjacent channel.
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_setup_wacleakage.fm
SETup:WACLeakage
411