Agilent Technologies 8960 Series Reference Manual page 560

Hide thumbs Also See for 8960 Series:

Table of Contents

W-CDMA Measurements

Measuring Spectrum Emission

1. Configure the mobile station to generate a 12.2 kbps or 64 kbps reference measurement channel (RMC).

2. Press the

Measurement selection

3. Select the Spectrum Emission Mask measurement.

4. Press the SEM Setup (

5. Set the measurement parameters as needed for your measurement situation.

6. Press the Change View (

) key to display the measurement results in either graphical or numeric format.

Typical adjacent channel leakage ratio results using graphical and numeric format.

S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_man_measurements.fm