Agilent Technologies 8960 Series Reference Manual page 346

FETCh:WSEMask
FETCh:WSEMask:[:ALL]?
Function Returns the spectrum emissions mask measurement results.
Measurement results are returned in the following order: integrity, overall pass/fail (0 = pass,
1 = fail, 9.91 E+37 = no result available), in-channel power (in dBm/3.84 MHz), and pass/fail
results for frequency ranges 1, 2, 3, and 4.
In-channel power is returned in dBm/3.84 MHz.
The four frequency ranges for this measurement are as follows:
• Range 1: +/- 2.5 to 3.5 MHz
• Range 2: +/- 3.5 to 7.5 MHz
• Range 3: +/- 7.5 to 8.5 MHz
• Range 4: +/- 8.5 to 12.5 MHz
If the multi-measurement state is on, the result represents the average of a number of spectrum
emission measurements. Multi-measurement state, by default, is off. To set up
multi-measurements, see
Query Range: -99.00 to +99.00 dBc
Resolution: 0.01
Requirements Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"FETCH:WSEMASK:ALL?"
FETCh:WSEMask:BAND[:ALL]?
Function Returns the power level vectors relative to in-channel power for all of the bands. Results are in
dBc. The total number of results returned is 266.
Query Range: -99.00 to +99.00 dBc
Resolution: 0.01
Requirements Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"FETCH:WSEMASK:BAND:ALL?"
346
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_fetch_wsemask.fm
"SETup:WSEMask:COUNt[:SNUMber]" .