SYSTem:MEASurement:RESet
:MEASurement
SYSTem
"Diagram Conventions" on page 210
SYSTem:MEASurement:RESet
Function
Sets all measurements to abort. If continous triggering is enabled, measurements will begin
a new measurement cycle.
Setting
These results are set to their default values when measurement reset occurs.
Requirements
Test Application Revision: A.01 and above
:RESet
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_system_meas_reset.fm
SYSTem:MEASurement:RESet
529