Call[:Cell]:Operating - Agilent Technologies 8960 Series Reference Manual

CALL[:CELL]:OPERating

CALL :OPERating
:CELL
"Diagram Conventions" on page 210
CALL[:CELL]:OPERating:MODE
Function Sets/queries the operating mode of the base station emulator. If a call is in progress during a
change in operating mode it will be dropped.
Setting Range:
Active Cell Mode = CALL
UTRA FDD Test Mode = FDDTest
CW Mode = CW
Cell Off Mode = OFF
Query Range: CALL|CW|FDDT|OFF
*RST Setting CALL
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"CALL:CELL:OPERATING:MODE FDDTEST" !Selects UTRA FDD test mode.
:MODE
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_call_operating.fm
CALL[:CELL]:OPERating
<sp> CALL|CW|FDDTest|OFF
? (returns CALL|CW|FDDT|OFF)
277