Agilent Technologies 8960 Series Reference Manual page 330

FETCh:WBERror
FETCh:WBERror:ICOunt?
Function Queries the intermediate count of bits tested.
To set up the total number of bits to test, see
Query Range: 0 to 999999
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"FETCH:WBERROR:ICOUNT?"
FETCh:WBERror:INTegrity?
Function Queries the measurement integrity indicator for the last loopback bit error measurement
completed.
Zero indicates a normal measurement. See
about non-zero integrity results.
Query Range: 0 through 23
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"FETCH:WBERROR:INTegrity?"
FETCh:WBERror:RATio?
Function Queries the loopback bit error ratio measurement.
Query Range: 0 to 99%, 9.91 E+37
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"FETCH:WBERROR:RATio?"
330
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_fetch_wberror.fm
"SETup:WBERror:COUNt"
"Integrity Indicator" on page 190
.
for information