Some cell and connection parameters can not be set unless the operating mode is set to Cell Off.
NOTE
Set Amplitude Offsets
You can account for path loss in your system by setting amplitude offsets. You can specify up to 20
frequency/amplitude pairs.
Programming Example
230
OUTPUT Testset;"SYST:COMM:GPIB:DEB ON"
240
OUTPUT Testset;"CALL:OPER:MODE OFF"
250
OUTPUT Testset;"SYST:CORR:FREQ 2000MHZ"
260
OUTPUT Testset;"SYST:CORR -1"
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_prog_getting_started_step1.fm
Step 1: Set Up the Test Set
97