System:configure:information:hardware:verbose; Related Topics - Agilent Technologies 8960 Series Reference Manual

SYSTem:CONFigure:INFormation:HARDware:VERBose?

SYSTem :CONFigure
"Diagram Conventions" on page 210
SYSTem:CONFigure:INFormation:HARDware:VERBose?
Function Query the manufacturer, model number, model number of the test application running, serial
number, revision, board ID, and cal file information. The information provided by the query
represents the configuration that existed when the test set was powered up.
*RST Setting Resets have no effect on this information. The information is gathered during the power up cycle.
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"SYSTEM:CONFIGURE:INFORMATION:HARDWARE:VERBOSE?" !Queries system hardware.

Related Topics

"Hardware Configuration Report" on page 629
"SYSTem:CURRent:TA" on page 526
"Obtaining Identification Information (*IDN)" on page 628
:INFormation
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_system_conf.fm
SYSTem:CONFigure:INFormation:HARDware:VERBose?
:HARDware :VERBose?
515