Agilent Technologies 8960 Series Reference Manual page 546

Changing Call Parameters
12.Press Return ( ).
F6
13.Press Uplink Parameters (
B. Call Parameter Changes Allowed in Active Cell Mode
1. Press .
CALL SETUP
2. Press the Cell Power (
3. Press key to go to screen 2 of 3.
More
4. Press DL DTCH Data (
5. Press DL PICH Data (
6. Press CAll Drop Timer (
546
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_gen_op_overview_call_parms.fm
) and set the PRACH settings and the uplink scrambling code.
F
4
) key, and set the desired level of the downlink signal.
F7
) key, and set the desired data pattern to be used on the downlink DTCH.
F7
) key, and set the DL PICH data to either All Zeros or All Ones.
F8
) to turn the timer on or off.
F11