Agilent Technologies 8960 Series Reference Manual page 551

How Do I Configure the Test Set for My Test System?
A. Configure instrument information and setup.
2
3
1. Press the
SYSTEM CONFIG
2. Press the Instrument Setup (
3. Adjust an instrument setting and then press the Close Menu (
B. Set amplitude offsets.
2
4
1. On the Configuration Summary Screen, press the RF IN/OUT Amptd Offset (
2. On the RF IN/OUT Amplitude Offset screen, press the RF IN/OUT Amptd Offset Setup (
3. Enter the amplitude offset for the test frequencies you use.
4. Press the Close Menu (
5. Press the Return (
key.
) key.
F1
) key.
F6
) key.
F6
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_gen_op_overview_sys_config.fm
How Do I Configure the Test Set for My Test System?
Test
Application
Revision
1
) key.
F6
F5
) key.
) key.
F2
551