Call:dtchannel:data - Agilent Technologies 8960 Series Reference Manual

CALL:DTCHannel:DATA

CALL :DTCHannel
"Diagram Conventions" on page 210
CALL:DTCHannel:DATA
Function Sets/queries the downlink dedicated traffic channel's data type.
While the DTCH Data is set to ZERos a continuous series of 0's is transmitted on the DTCH.
While the DTCH Data is set to ONES a continuous series of 1's is transmitted on the DTCH.
While the DTCH Data is set to either CCITT PRBS9 or CCITT PRBS15 the appropriate
pseudo-random bit sequence is transmitted continuously on the DTCH.
Setting Range: PRBS9|PRBS15|ONES|ZERos
Query Range: PRBS9|PRBS15|ONES|ZER
*RST Setting PRBS15
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"CALL:DTCHANNEL:DATA ZER" !Sets the DTCH data pattern to continuous zeroes.
:DATA
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_call_dtchannel_data.fm
<sp>PRBS9|PRBS15|ONES|ZERos
? (returns PRBS9|PRBS15|ONES|ZER)
CALL:DTCHannel:DATA
260