Call[:Cell]:Scode - Agilent Technologies 8960 Series Reference Manual

CALL[:CELL]:SCODe

CALL
[:CELL]
"Diagram Conventions" on page 210
CALL[:CELL]:SCODe[:PRIMary]
Function Sets/queries the primary scrambling code.
The actual code number for the primary scrambling code is 16 times the value of this setting. See
3GPP TS 25.213, "Spreading and Modulation (FDD)" for a complete description of the
relationship between this index and the actual spreading code number.
This setting cannot be changed while the active cell operating mode. Attempting to change this
setting while in this mode will result in the following error message: "Command Rejected.
Change Not Allowed in Active Cell Mode." Use the cell off operating mode when changing this
setting.
Setting Range: 0 to 511
Query Range: 0 to 511
*RST Setting 1
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"CALL:CELL:SCODe 10" !Sets the primary scrambling code to 10.
:SCODe
[:PRIMary]
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_call_scode.fm
CALL[:CELL]:SCODe
<sp><num value>
? (returns num value)
288