Agilent Technologies 8960 Series Reference Manual page 462

STATus:OPERation:
STATus:OPERation:NMRReady:AMPS Condition Register Bit Assignment
The STATus:OPERation:NMRReady:AMPS register bits indicate when a measurement has been completed
and new measurement results are available.
Bit Binary
Number Weighting
15 32768
14 16384
13 8192
12 4096
11 2048
10 1024
9 512
8 256
7 128
6 64
5 32
4 16
3 8
2 4
1 2
0 1
Program Examples - STATus:OPERation:NMRReady:AMPS
OUTPUT 714;"STATUS:OPERATION:NMRREADY:AMPS:EVENT?" !Queries the New Measurement
OUTPUT 714;"STATUS:OPERATION:NMRREADY:AMPS:CONDITION?" !Queries the New Measurement
OUTPUT 714;"STATUS:OPERATION:NMRREADY:AMPS:ENABLE 8" !Sets New Measurement Results
OUTPUT 714;"STATUS:OPERATION:NMRREADY:AMPS:NTR 2" !Sets the New Measurement Results
OUTPUT 714;"STATUS:OPERATION:NMRREADY:AMPS:PTR 4" !Sets the New Measurement
462
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_status_operation.fm
Condition
Not Used. Defined by SCPI.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
Reserved for future use.
FM New Measurement Result
Ready
FSTABility New Measurement
Result Ready
ATXPower New Measurement
Result Ready
Extension Bit
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This bit is always 0.
This is a 1 if the measurement has been completed
and has produced new results.
This is a 1 if the measurement has been completed
and has produced new results.
This is a 1 if the measurement has been completed
and has produced new results.
This bit is always 0.
!Results Ready AMPS Event Register.
!Results Ready AMPS Condition Register.
!Ready AMPS Enable Regigter for bit 3.
!Ready AMPS Negative Transition
!Register for bit 1.
!Results Ready AMPS Positive
!Transition Register for bit 2
Description