Agilent Technologies 8960 Series Reference Manual page 238

CALL[:CELL]:CLPControl:UPLink
CALL[:CELL]:CLPControl:UPLink:ALGOrithm
Function Sets/queries the power control algorithm setting when closed loop power control is active.
Setting Range:
• ALG1
• ALG2
Query Range: Same as setting range.
*RST Setting ALG2
Requirements Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"CALL:CELL:CLPControl:UPLink:ALGOrithm ALG1" !Sets the uplink closed loop power control
algorithm to 1.
238
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_call_clpcontrol.fm