Measurement Calibration
This measurement should be calibrated using the Calibrate Measurements function
("CALibration:MEASurements?" on page
last calibration. If this situation exists, the integrity indicator value becomes 19 and a message is displayed
indicating "Uncalibrated Due to Temperature".
Related Topics
•
"Programming an Adjacent Channel Leakage Ratio Measurement"
•
"Adjacent Channel Leakage Ratio Troubleshooting"
•
"Test Adherence to Standards"
•
"What 3GPP W-CDMA Conformance Tests are supported?" on page 57
•
"Triggering of Measurements"
•
"Statistical Measurement Results"
•
"Integrity Indicator"
Adjacent Channel Leakage Ratio Measurement Description
223) when the temperature has changed by ± 10° C or more since the
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_meas_aclr_desc.fm
31