Agilent Technologies 8960 Series Reference Manual page 295

CALL:STATus[:STATe][:VOICe]?
Function Queries the status of the call. Status can be connected, idle, paging, registering, releasing, or
setting up service.
Query Range: CONN|IDLE|PAG|REG|REL|SREQ
Only IDLE is returned in FDD Test operating mode.
*RST Setting IDLE
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"CALL:STATUS?" !Returns the current call processing state.
CALL:STATus:AICHannel[:LEVel]?
Function Queries the current level of the acquisition indicator channel. This setting is not used in FDD
Test operating mode.
Query Range: -20.00 to 0 dB, 9.91 E+37
Resolution: 0.01 dB
*RST Setting -9.9 dB
Requirements Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"CALL:STATUS:AICHANNEL:LEVEL?"
CALL:STATus:AICHannel:STATe?
Function Queries the current state of the acquisition indicator channel. This setting is not used in FDD
Test operating mode.
Query Range: 0|1
*RST Setting 1 (on)
Requirements Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"CALL:STATUS:AICHANNEL:STATE?"
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_call_status.fm
CALL:STATus
295