Call:handoff[:Immediate]; Related Topics - Agilent Technologies 8960 Series Reference Manual

CALL:HANDoff[:IMMediate]

CALL
"Diagram Conventions" on page 210
CALL:HANDoff[:IMMediate]
Function Initiates a handoff while on a call (and in Active Cell mode). Any measurements that have been
initiated are aborted when a handoff is initiated. A handoff can initiate a change of channel type,
a change in downlink DPCH channelization code, a change in frequency (UARFCN), or both
while maintaining the connection.
Requirements Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"CALL:HANDOFF:IMMEDIATE"

Related Topics

"CALL:SETup:CHANnel[:SELected]:DOWNlink"
"CALL:SETup:CHANnel[:SELected]:UPLink"
:HANDoff
[:IMMediate]
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_call_handoff.fm
CALL:HANDoff[:IMMediate]
268