Agilent Technologies 8960 Series Reference Manual page 233

CALL:CCPChannel:SECondary:CCODe
Function Sets/queries the secondary common control physical channel's channelization code.
This setting cannot be changed while in active cell operating mode. Attempting to change this
setting while in this mode results in the following error message: "Command Rejected. Change
Not Allowed in Active Cell Mode." Use the cell off operating mode when changing this setting.
Setting Range: CODE2|CODE3|CODE8|CODE9
Query Range: CODE2|CODE3|CODE8|CODE9
*RST Setting CODE2
Requirements Test Application Revision: A.02 and above.
Programming Example
OUTPUT 714;"CALL:CCPCHANNEL:SECONDARY:CCODE CODE3" !Sets the S-CCPCH channelization code.
CALL:CCPChannel:SECondary[:SLEVel]
Function Sets/queries the initial power offset of the secondary common control physical channel . This
command sets the power offset level and turns on the power offset.
This setting cannot be changed while in active cell operating mode. Attempting to change this
setting while in this mode results in the following error message: "Command Rejected. Change
Not Allowed in Active Cell Mode." Use the cell off operating mode when changing this setting.
Setting Range: -20.00 dB to 0 dB
Resolution: 0.01
Query Range: -20.00 dB to 0 dB
Resolution: 0.01
*RST Setting -6.9 dB
Requirements Test Application Revision: A.02 and above.
Programming Example
OUTPUT 714;"CALL:CCPCHANNEL:SECONDARY:SLEVEL -10DB" !Enables and sets S-CCPCH initial power
offset.
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_call_ccpchannel.fm
CALL:CCPChannel
233