Cell Off Operating Mode; Related Topics - Agilent Technologies 8960 Series Reference Manual

Cell Off Operating Mode

Cell Off operating mode and Active Cell operating mode share the same settings. However, Cell Off mode lets
you change cell parameters, downlink channel codes and levels, and uplink parameters that are used for call
processing that cannot be changed during Active Cell operation.
Use Cell Off operating mode to set up the downlink signal parameters before establishing a connection to the
UE (mobile station). After making the settings, switch to Active Cell operating to begin generating the
downlink signal.
NOTE No signal is generated by the test set during Cell Off operation, regardless of the Cell Power
setting. All settings are deferred until the Active Cell operating mode or FDD Test operating
mode is used.

Related Topics

"Active Cell Operating Mode" on page 64
"Setting Cell Parameters" on page 74
"Setting Downlink Channel Codes and Levels" on page 75
"Setting Downlink Power Levels" on page 78
"Setting Downlink Parameters" on page 82
"Setting Uplink Parameters" on page 80
"Setting Uplink Channel and Power Control" on page 84
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_gen_bse_celloff.fm
Cell Off Operating Mode
71