Agilent Technologies 8960 Series Reference Manual page 549

2. Press the key on the right side two times to go to screen 3 of 3.
More
3. Press the UL CL Power Ctrl (
power manually. Select from
• Alternating bits
• All Up bits
• All Down bits
• 10 Up/Down bits
4. If you've chosen Alternating bits, you can use the Send Step Up TPC Bit Pattern (
Send Step Down TPC Bit Pattern (
one step.
) key, and select your desired method of controlling the UE's transmit
F8
) key to change the UE's transmit power either up or down by
F11
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_gen_op_overview_tx_level.fm
Changing UE TX Power Levels
) key or the
F10
549