Agilent Technologies 8960 Series Reference Manual page 257

CALL:DPCHannel:RMC12:CCODe
Function Sets/queries the dedicated physical control channel's 12.2 kbps reference measurement channel's
channelization code.
The type of bearer service being carried by the WCDMA link drives the configuration of the
DTCH and DCCH logical channels, the DCH Transport channel, and the DPCH physical
channel. The 8960 supports only symmetrical channels, and only one type of bearer service at a
time.
This setting cannot be changed while in active cell operating mode. Attempting to change this
setting while in this mode results in the following error message: "Command Rejected. Change
Not Allowed in Active Cell Mode." Use the cell off operating mode when changing this value.
Setting Range:
CODE6|CODE9|CODE10|CODE20|CODE29|CODE37|CODE45|CODE54|CODE60|
CODE63|CODE70|CODE76|CODE87|CODE93|CODE112|CODE118
Query Range:
CODE6|CODE9|CODE10|CODE20|CODE29|CODE37|CODE45|CODE54|CODE60|
CODE63|CODE70|CODE76|CODE87|CODE93|CODE112|CODE118
*RST Setting CODE9
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"CALL:DPCHANNEL:RMC12:CCODE CODE3" !Sets the 12.2 RMC's channelization code.
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_call_dpchannel.fm
CALL:DPCHannel
257