Agilent Technologies 8960 Series Reference Manual page 425

SETup:WCPower:TRIGger:DELay
Function Sets/queries the channel power measurement's trigger delay setting.
This setting can be used to delay the measurement trigger in order to start a measurement
during a specific timeslot in the frame. For example, a 1.333 ms delay would cause the trigger to
wait until after the first two timeslots have elapsed.
Setting Range: -10 to 10 milliseconds
Resolution: 0.0001 millisecond
Query Range: -10 to 10 milliseconds
*RST Setting 0 seconds
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"SETUP:WCPOWER:TRIGGER:DELAY 1MS"
SETup:WCPower:TRIGger:SOURce
Function Sets/queries the channel power measurement's trigger source.
Setting Range: IMMediate|PROTocol|RISE|AUTO
Query Range: IMM|PROT|RISE|AUTO
*RST Setting AUTO
Requirements Test Application Revision: A.01 and above
Programming Example
OUTPUT 714;"SETUP:WCPOWER:TRIGGER:SOURCE IMMEDIATE"
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_setup_wcpower.fm
SETup:WCPower
425