Changing Downlink Channel Codes And Levels From The Front Panel; Related Topics - Agilent Technologies 8960 Series Reference Manual

Changing Downlink Channel Codes and Levels From the Front Panel

1. Press the
CALL SETUP
2. Press the key to display the available operating modes.
F1
3. Select Cell Off or Active Cell. During Active Cell operation you can only change the Connected DL
Channel Levels.
4. Press the key (in the Call Control column) to display menu 2 of 2.
More
5. Press the Generator Info (
6. Select the type of setting you want to change (channel code, channel level, or connected channel level).
7. Select the setting to change and enter or select the new value.

Related Topics

• "Active Cell Operating Mode"
• "Cell Off Operating Mode"
• "Setting Downlink Power Levels"
key.
) key.
F3
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_gen_bse_dl_codes_lvls.fm
Setting Downlink Channel Codes and Levels
77