Call[:Cell]:Lacode - Agilent Technologies 8960 Series Reference Manual

CALL[:CELL]:LACode

CALL
[:CELL]
"Diagram Conventions" on page 210
CALL[:CELL]:LACode[:SELected]
Function Sets/queries the local area code (LAC), for the currently selected test application.
This setting cannot be changed whil the Operating Mode is set to "Active Cell." This setting can
only be changed when the Operating Mode is set to Cell Off.
Setting Range: 0 to 65535
Query Range: 0 to 65535
*RST Setting 1
Requirements Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"CALL:CELL:LACODE 310" !Sets the local area code to 310.
CALL[:CELL]:LACode:WCDMa
Function Sets/queries the local area code (LAC), when using the W-CDMA test application.
This setting cannot be changed whil the Operating Mode is set to "Active Cell." This setting can
only be changed when the Operating Mode is set to Cell Off.
Setting WCDMa Range: 0 to 65535
Query Range: 0 to 65535
*RST Setting 1
Requirements Test Application Revision: A.02 and above
Programming Example
OUTPUT 714;"CALL:CELL:LACODE:WCDMA 310" !Sets the WCDMA local area code to 310.
:LACode
[:SELected]
:WCDMa
S:\Hp8960\E1963A WCDMA\4.0 release\Reference Guide\Chapters\wcdma_hpib_call_lacode.fm
CALL[:CELL]:LACode
<sp><num value>
? (returns num value)
269